Electric underfloor heating

Underfloor heating is becoming increasingly popular in this country, as it not only ensures pleasantly warm feet, but also economical operation. The electrical conductors ensure that the electric underfloor heating heats up quickly. This system can be installed quickly and easily. In addition to use in new buildings, retrofitting during renovation or modernization is also recommended. Especially in bathrooms or in the kitchen area, the electric underfloor heating ensures pleasant temperature.

For parquet, laminate floors and ceramic coverings

Electrical heating systems can be laid under different floors. In addition to laminate and parquet, laying an electric surface heating is also possible under tiles or ceramic coverings without any problems. The costs for electrical underfloor heating are relatively low compared to the total investment. Viessmann electric heating systems can be installed quickly with a manageable amount of installation work. You can read about how electric underfloor heating works in detail on the thin-bed heating page.

Electric underfloor heating can also be laid under laminate.

Minimal height - ideal for laminate and parquet

With a thickness of just 1.3 millimeters, the heating mats are also suitable for laying under laminate and parquet floors. They are the ideal solution if, when renovating an apartment, the screed is not replaced in favor of conventional underfloor heating.

The mats are laid floating. They are installed quickly and easily with just one connecting cable. Thanks to different outputs and sizes, they can be flexibly adapted to all room sizes. They are also available as a set with controller and accessories.


Product range

Vitoplanar EF2: For tiles and ceramic coverings

Vitoplanar EF2: For tiles and ceramic coverings

  • 160 W/m² (Standard)
  • 160 to 1120 W (1 to 7 m²)
  • Self-adhesive mesh heating mat
  • Ideal for renovation or in new buildings (only 2.7 mm high)
  • Simple installation through dipole connection (two-wire) - only one connection cable
  • Low magnetic field operation (< 25 nT)

Vitoplanar EF2 – Set:

  • 320 to 800 W (2 to 5 m²)
  • Included in the set:
    – Assembled heating mat
    – Empty pipe
    – Floor sensor
    – Sensor sleeve
    – Controller eTouch eco for room or floor temperature, self-learning
  • Other features like the Vitoplanar EF2
Vitoplanar EF3: Elektrische Flächenheizung für Parkett- und Laminatböden

Vitoplanar EF3: For parquet and laminate floors

  • 120W/m² (typical)
  • 120 to 840 W (1 to 7 m²)
  • Floating installation on screed
  • Ideal for renovation (only 1.3 mm high)
  • Simple installation through dipole connection (two-wire) - only one connection cable
  • Low magnetic field operation (< 25 nT)

Vitoplanar EF3 – Set:

  • 240 bis 600 W (2 to 5 m²)
  • Included in the set:
    – Assembled heating mat
    – Empty pipe
    – Floor sensor
    – Eensor sleeve
    – eTouch eco controller for room or floor temperature, self-learning (e.g. weekly program)
  • Other features like the Vitoplanar EF3

Kompakter MatriX-Diskbrenner

Vitoplanar built-in switch thermostat with touch display